Add a PXL Site

Add a PXL Site

1.0 Introduction

The following section explains how to add a PXL site to Borealis. Once the PXL site has been added you will then be able to add a claim a hub. When the hub is associated with a PXL site it will then automatically be configured to work with PXL controllers. The following steps assume that you have already registered your Borealis user account, verified the account and have worked through the process of creating an organization (if applicable) and a new system.

 

Once a site has been added you will then be able to add a hub (or multiple hubs) to the site. Each hub supports up to 32 doors.

 

A site may represent a business location, a floor of a building or any other grouping of hardware. The requirements for a site are as follows:

Each site will need a minimum of one physical hub.

  • All controllers on a site must be of the same hardware family, such as: Keri PXL or Keri NXT-MSC (mercury-powered).
  • You will need to use multiple hubs if you wish to use different hardware/controller types (for example: Standard NXT AND NXT-Mercury-Powered (MSC) controllers.
  • A site must have a world timezone assigned (all controllers on the site will use this world timezone).

 

2.0 Add PXL Site Procedure

  1. Log into the Borealis web portal at: keri.aetheros.net.

  2. On the left-side of the screen, click on Sites.

    Menu sites

  3. The Sites screen will open.

  4. Click the CREATE button located on the right of the screen.

    Site Create Button

  5. A new create site form will appear.

    Site create form

  6. Enter a name for the new site.

  7. Enter a contact name for the site.

  8. Enter a contact phone number for the site.

  9. Select the PXL as the hardware type to be used.

    Select PXL Site to Add

  10. Select the country where the site is located.

  11. Select a state (where applicable).

  12. Select the world time zone to apply to the site.

  13. Select to enable keypads on the site (if the site uses readers that have keypads).

  14. Click the submit button.

  15. At the top of the screen, you will see a message that the site has been successfully created.

    PXL Site Created


    • Related Articles

    • Add a KB Site

      1.0 Introduction The following section explains how to add a KB site to Borealis. Once the KB site has been added you will then be able to add a claim a hub. When the hub is associated with a KB site it will automatically be configured to work with ...

    • Add a PXL Hub

      1.0 Introduction The following steps explain how to add and claim a hub. When adding the hub you will associate it with the PXL site. Once the hub has been successfully claimed the hub will be configured for the PXL hardware type. Notes: A hub ...

    • Add an NXT-MSC and True Mercury Site

      1.0 Introduction The site determines which hardware type will be used. Once a site has been added you will then be able to add a hub (or multiple hubs) to the site. A site may represent a business location, a floor of a building or any other grouping ...

    • Add a KB Hub

      The following steps explain how to add and claim a hub. When adding the hub you will associate it with the KB site. Once the hub has been successfully claimed the hub will be configured for the KB hardware type. Notes: A hub configured for KB will ...

    • Add a PXL Primary Controller via Manual Add

      1.0 Introduction Once the PXL-configured hub has been claimed and updated, you can then add a PXL primary controller. A PXL primary is the first controller on the network (and is address #1). There are two methods for adding a PXL primary controller ...