Add a KB Site

Add a KB Site

1.0 Introduction

The following section explains how to add a KB site to Borealis. Once the KB site has been added you will then be able to add a claim a hub. When the hub is associated with a KB site it will automatically be configured to work with KB controllers. The following steps assume that you have already registered your Borealis user account, verified the account and have worked through the process of creating an organization and a new system.

 

Once a site has been added you will then be able to add a hub (or multiple hubs) to the site. Each hub supports up to 32 doors.

 

A site may represent a business location, a floor of a building or any other grouping of hardware. The requirements for a site are as follows:


Each site will need a minimum of one physical hub.

  • All controllers on a site must be of the same hardware family, such as: Keri KB, Keri PXL or Keri NXT-MSC (mercury-powered).
  • You will need to use multiple hubs if you wish to use different hardware/controller types, for example: Keri KB AND NXT-Mercury-Powered (MSC) controllers.

    Note: Keri KB and Standard NXT controllers use the same hub. Standard NXT controllers can also be replaced with KB controllers.

  • A site must have a world timezone assigned (all controllers on the site will use this world timezone).

 

2.0 Add KB Site Procedure

  1. Log into the Borealis web portal at: keri.aetheros.net.

  2. On the left-side of the screen, click on Sites.

    Menu sites

  3. The Sites screen will open.

  4. Click the CREATE button located on the right of the screen.

    Site Create Button

  5. A new create site form will appear.



  6. Enter a name for the new site.

  7. Enter a contact name for the site.

  8. Enter a contact phone number for the site.

  9. Select the Keri Standard NXT and Keri Borealis KB Controllers as the hardware type to be used.



  10. Select the country where the site is located.

  11. Select a state (where applicable).

  12. Select the world time zone to apply to the site.

  13. Select to enable keypads on the site (if the site uses readers that have keypads).

  14. Click the submit button.

  15. At the top of the screen, you will see a message that the site has been successfully created.


    • Related Articles

    • Add a KB Hub

      The following steps explain how to add and claim a hub. When adding the hub you will associate it with the KB site. Once the hub has been successfully claimed the hub will be configured for the KB hardware type. Notes: A hub configured for KB will ...

    • Add a PXL Site

      1.0 Introduction The following section explains how to add a PXL site to Borealis. Once the PXL site has been added you will then be able to add a claim a hub. When the hub is associated with a PXL site it will then automatically be configured to ...

    • Add a KB Controller via Scan

      1.0 Introduction From the main menu, click on Hubs. Your hub will appear in the list. Locate the Actions drop-down menu on the right, click the down-arrow and select Scan, or click the SCAN button. The scan function will scan the local network for KB ...

    • Create a Standard NXT Site

      1.0 Introduction The site determines which hardware type will be used. Once a site has been added you will then be able to add a hub (or multiple hubs) to the site. A site may represent a business location, a floor of a building or any other grouping ...

    • Add a KB Controller Using the Connect App

      1.0 Introduction The Borealis Connect app has a QR Enroll function that allows you to quickly and easily enroll a new KB 2D/4D controller using the QR code that's printed on the controller. Again, this section assumes you have an existing Borealis ...